|Year : 2013 | Volume
| Issue : 36 | Page : 32-37
Optimization of enzyme-assisted extraction and characterization of collagen from Chinese sturgeon (Acipenser sturio Linnaeus) skin
Weiwei Feng1, Ting Zhao1, Ye Zhou2, Fang Li1, Ye Zou1, Shiqi Bai2, Wei Wang2, Liuqing Yang3, Xiangyang Wu4
1 School of Food and Biological Engineering, Jiangsu University, 301 Xuefu Rd., 212013 Zhenjiang, Jiangsu, China
2 School of Pharmacy, Jiangsu University, 301 Xuefu Rd., 212013 Zhenjiang, Jiangsu, China
3 School of Chemistry and Chemical Engineering, Jiangsu University, 301 Xuefu Rd., 212013 Zhenjiang, Jiangsu, China
4 School of Environment, Jiangsu University, 301 Xuefu Rd., 212013 Zhenjiang, Jiangsu, China
|Date of Submission||14-Jul-2012|
|Date of Acceptance||19-Sep-2012|
|Date of Web Publication||7-Sep-2013|
School of Chemistry and Chemical Engineering, Jiangsu University, 301 Xuefu Rd., 212013 Zhenjiang, Jiangsu
Source of Support: None, Conflict of Interest: None
| Abstract|| |
Background: Sturgeon (Acipenser sturio Linnaeus) skin contains high amount of nutrients including unsaturated fatty acids and collagen. A pepsin-assisted extraction procedure was developed and optimized for the extraction of collagen from Chinese sturgeon (Acipenser sturio Linnaeus) skins. Objective: To determine the optimum conditions with the maximum yield of the pepsin-soluble collagen (PSC) extraction. Materials and Methods: The conditions of the extraction were optimized using response surface methodology. The Box-Behnken design was used to evaluate the effects of the three independent variables (extraction time, enzyme concentration, and solid-liquid ratio) on the PSC yield of the sturgeon skin. Results: The optimal conditions were: solid-liquid ratio of 1:11.88, enzyme concentration of 2.42%, and extraction time of 6.45 h. The maximum yield of 86.69% of PSC was obtained under the optimal conditions. This value was not significantly different from the predicted value (87.4%) of the RSM (P < 0.05). Conclusion: The results of this study indicated that the production of PSC from sturgeon skin is feasible and beneficial. The patterns of sodium dodecyl sulfate-polyacrylamide gel electrophoretic patterns (SDS-PAGE) indicated that the sturgeon skin contains type I collagen, which is made of α-chain and β-chain. The infrared spectra of the collagens also indicated that pepsin hydrolysis does not affect the secondary structure of collagen, especially triple-helical structure.
Keywords: Extraction, pepsin-soluble collagen, response surface methodology, sturgeon skin, SDS-PAGE
|How to cite this article:|
Feng W, Zhao T, Zhou Y, Li F, Zou Y, Bai S, Wang W, Yang L, Wu X. Optimization of enzyme-assisted extraction and characterization of collagen from Chinese sturgeon (Acipenser sturio Linnaeus) skin. Phcog Mag 2013;9, Suppl S1:32-7
|How to cite this URL:|
Feng W, Zhao T, Zhou Y, Li F, Zou Y, Bai S, Wang W, Yang L, Wu X. Optimization of enzyme-assisted extraction and characterization of collagen from Chinese sturgeon (Acipenser sturio Linnaeus) skin. Phcog Mag [serial online] 2013 [cited 2019 Sep 19];9, Suppl S1:32-7. Available from: http://www.phcog.com/text.asp?2013/9/36/32/117859
| Introduction|| |
Sturgeon (Acipenser sturio Linnaeus) is one of the most common freshwater fish consumed worldwide. This is as results of its high nutrient (unsaturated fatty acids and proteins) content with a good mouth-feel taste. Chinese sturgeon is a prehistoric fish that attracts price for its high quality flesh, and it is suitable for processing to other fish products. The nutritional value coupled with the high patronage of the sturgeon has resulted in increased production ("Sturgeon Aquaculture").  Statistics available indicates that the annual production of sturgeon in China alone exceeds 10,000 tonnes.  Sturgeon can be used for sturgeon fillet production. During processing, solid waste is mostly generated, especially at the skins and cartilages. Sturgeon's skin is a form of connective tissue that contains a lot of collagen, proteoglycans, and water,  and that can be used as a potential raw material for collagen extraction.
According to Kittiphattanabawon et al.,  sturgeon skin contains collagen that is used to manufacture leathers. The collagen also used in the film industries, pharmaceuticals, and for cosmetic, food, and biomedical materials. Collagen is commonly isolated from the skins and bones of sturgeon fish. It is a crucial structural protein responsible for the formation of tissues such as skin, bone, and tendon. Collagen also provides support for organs and protect tissues.  The molecules of collagen have common triple-helical domains with each of the three α-helices containing the repeating sequences Gly-X-Y (X and Y are proline and hydroxyproline residues, respectively). 
The extraction of collagen from fish skin was carried out using pepsin and acid. , As far as we are concerned, not much research has been conducted on the optimal conditions for the optimum yield of pepsin-soluble collagen (PSC). Factors such as extraction time, enzyme concentration, and solid-liquid ratio affect the extraction ability of the collagen. In this study, response surface methodology (a statistical method that uses quantitative data from an appropriate experimental design for determining or simultaneously for solving multivariate equations) was use to generate mathematical model and optimize the process levels. [9-11] The aim of the study was to investigate the effect of extraction time, enzyme concentration, and solid-liquid ratio on the yield of PSC extracted from sturgeon skin using response surface methodology and to determine the structure of sturgeon skin characterization.
| Materials and methods|| |
Materials and Chemicals
Pepsin was purchased from Sinopharm Chemical Reagent Co., Ltd (Shanghai, China). High molecular weight protein marker and calf-skin collagen were produced at TaKaRa Biotechnology (Dalian) Co., Ltd. and Sigma Chemical Co., respectively. All solvents and chemicals were of analytical grade and obtained from Zhenjiang Chemical Company (Zhenjiang, Jiangsu, China). Distilled water was used throughout the study. The live sturgeons (average weights in the range of 1.5-2.5 kg) were obtained from Lianchuang Aquatic Science and Technology Demonstration Park of Zhenjiang, China. After killing the sturgeons, the skins were washed with water and frozen at –18 C for 2 weeks (prior to collagen extraction).
Preparation of collagen from sturgeon skin
The collagens were extracted using the method of Nalinanon et al.  with slight modification. All the preparation procedures were carried out at a temperature of 4 C.
Pretreatment of sturgeon skin
The skins of sturgeons were first thawed and washed with water. The residual meat on the skins were removed manually and washed with water. The skins were then chopped into lengths of 0.5-1.0 cm and further washed with water. To remove noncollagenous proteins, the prepared sturgeon skins were mixed with 3.5% NaCl at a solid ratio of 1:10 (w/v) followed by continuous stirring at 200 rpm for 24 h. The NaCl solution was changed every 4 h. The skins were then washed with water and defatted with 0.5% Na 2 CO 3 at a solid-liquid ratio of 1:20 (w/v), followed by continuous stirring at 200 rpm for 48 h. The 0.5% Na 2 CO 3 solution was changed every 8 h. The defatted skins were washed with water till the neutral point, and then freeze-dried (prior to collagen extraction).
Pepsin-soluble collagen extraction
The defatted skins were subjected to collagen extraction using pepsin solution. Extraction time, enzyme concentration, and solid-liquid ratio were the chosen variables with five levels. The resulting viscous solution was centrifuged at 5000 rpm for 20 min in order to remove the insoluble substances. The collagen was then precipitated by adding (NH 4 ) 2 SO 4 to the final concentration of 2.6 M in the presence of 0.05 M tris(hydroxymethyl)aminomethane (pH 7.0). The resulting sediments were collected by centrifugation at 5000 rpm for 20 min and dissolved in water, then sequentially dialyzed against water. The dialyzates were freeze-dried and denoted as PSC.
Among the PSC extraction, the one with the highest content was chosen for further optimization with RSM (software Design Expert 6.0, Stat-Ease Inc., USA). A Box-Behnken design with three variables was used to determine the response pattern and to establish the statistical model.  The effects of extraction time (X1 ), solid-liquid ratio (X2 ), and enzyme concentration (X3 ) on the enzymatic extraction of the PSC from sturgeon skin were then determined with RSM at a three-variable and five-level. The observed values for the PSC extracted at different combinations of the independent variables are presented in [Table 1]. The coded levels of the independent variables used in BBD are also listed in [Table 2].
|Table 1: Box-Behnken design and the response for the content of pepsin-soluble collagen from sturgeon skin |
Click here to view
Sodium dodecyl sulfate-polyacrylamide gel electrophoresis
Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE; DYCZ-24DN mini double vertical electrophoresis apparatus and DYY-6C-type bi-stable electrophoresis power supply, Beijing 61 Instrument Factory, China) was performed to determine the purity of PSC described by Suphatharaprateep.  The samples were dissolved in a 50 g/L SDS solution. The mixtures were then heated to 100 C for 15 min, followed by centrifugation at 8500 rpm for 5 min to remove undissolved debris. The solubilized samples were mixed with the buffer sample (0.5 mol/L Tris-HCl, pH 6.8 containing 40 g/L SDS, 4% glycerol in the presence or absence of 20% β ME) in the ratio of 1:1 (volume ratio). The mixtures were loaded onto a polyacrylamide gel, which was made of 75 g/L separating gel and 40 g/L stacking gel and then subjected to electrophoresis at a constant current of 20 mA/gel. After electrophoresis, the gels were stained with 0.05% (w/v) Coomassie blue R-250 in 15% (v/v) methanol and 5% (v/v) acetic acid for 30 min. The gels were then de-stained with a mixture of 30% (v/v) methanol and 10% (v/v) acetic acid. High molecular weight protein markers were used to estimate the molecular weight of the proteins. Type I collagens from calf-skins were used as standard collagens.
Fourier transform infrared spectroscopy
Fourier transform infrared (FTIR) (Nexus 470 Fourier transform infrared spectrometer, Thermo Nicolet Co., USA) spectroscopy of collagens were analyzed using the method of Cao et al. and Xu et al. , The FTIR spectra were obtained at a resolution of 4 cm -1 in the range of 4000-400 cm -1 at room temperature. The FTIR spectra were obtained with discs containing 2 mg samples in approximately 100 mg potassium bromide (KBr disk) with a Fourier transform IR instrument.
| Results and discussion|| |
Optimization of conditions for extraction of PSC
The analysis of variance (ANOVA) of RSM on the enzymatic extraction of PSC from the sturgeon skins is shown in [Table 3]. The exploration and optimization of a fitted response surface may produce poor or misleading results unless the model exhibits a good fit, which makes checking of the model adequacy essential.  The P value of the model was less than 0.0001. Lack of fitness value of the model was 0.2389, which was not statistically significant. These two values confirmed the goodness of the model fitness.
|Table 3: Analysis of variance for the response surface quadratic model of the content of pepsin-soluble collagen from sturgeon skin |
Click here to view
Coefficient of determination (R-Squared) is defined as the ratio of the variation of the variables under consideration to the total variation, which measures the degree of fitness.  The value of R-Squared less than 1 indicates a poor relevance of the dependent variables in the model. The model can fit well with the actual data when R-Squared approaches unity (0).  The coefficient of determination (R-Squared) of the model was 0.9747, which indicated that the model adequately represented the real relationship between the chosen parameters. The results of the error analysis indicated that the lack of fitness was insignificant (P > 0.05). The coefficient of variation (CV) was less than 5% which indicated that the model was reproducible.  The predicted residual sum of squares for the model that describes the measure of how a particular model fits each point in the design was 1554.43. The model F-value (30.02) implied that the model was significant. The predicted second-order polynomial model was:
Y = 81.20 + 8.32X1 + 17.73X2 + 6.80X3 – 1.72X1X2 – 2.21XIX3 – 4.12X2X3 – 8.21X1 2 – 16.37X2 2 – 11.77X3 2
where Y is the yield of PSC, X1 , X2 , and X3 are the coded variables for extraction time, solid-liquid ratio, and enzyme concentration, respectively.
The effect of extraction time and solid-liquid ratio on the yield of PSC at the fixed reaction enzyme concentration of 2.0% is shown in [Figure 1]. From [Figure 1], it is observed that at a low solid-liquid ratio, the PSC yield increased with an increase in solid-liquid ratio. This is probably due to the increase in the reaction area of the enzyme. The PSC yield did not increase with a further increase in the solid-liquid ratio, which could be due to the complete reaction of sturgeon skin with the liquid. In addition, the extraction time indicated positive effects on the yield of PSC. The yield of PSC increased with the extension of time, especially between 3 and 7 h. When the extraction time was longer than 7 h, an increase in the yield was relatively slight. The optimal value of the extraction time and the solid-liquid ratio was 6.45 and 1:11.88, respectively.
|Figure 1: Response surface plot showing the effects of extraction time and solid-liquid ratio on the yield of pepsin-soluble collagen: the enzyme concentration was constant at 2.0%|
Click here to view
|Figure 2: Response surface plot showing the effects of extraction time and enzyme concentration on the yield of pepsin-soluble collagen: the solid-liquid ratio was constant at 1:10|
Click here to view
The effect of enzyme concentration and extraction time on the PSC yield was determined at the a fixed solid-liquid ratio of 1:10, which was shown in [Figure 2]. Enzyme concentration indicated the positive effect on the yield of PSC. The yield of PSC was increased with an increase in enzyme concentration to a certain value (approximately 2.4 M), thereafter decreased. Pepsin is the most popular reagent used for collagen preparation due to the high extractability. The solubility of collagen in pepsin solution can affect the extraction of the collagen from sturgeon skin. The concentration of the pepsin solution can change the number of contact sites. In this study, a relatively higher yield was obtained at the concentration of 2.42%. This could be attributed to more positively charged amine groups of the collagen at this concentration. The effect of solid-liquid ratio and enzyme concentration on the PSC yield at the fixed extraction time of 6 h is shown in [Figure 3]. Evidently, there was significant interaction difference between the solid-liquid ratio and enzyme concentration. The optimal conditions obtained with RSM at a three-variable and five-level central composite design include a solid-liquid ratio of 1:11.88, an enzyme concentration of 2.42%, and an extraction time of 6.45 h. Under the optimal conditions, the content of the PSCs was 86.69%.
|Figure 3: Response surface plot showing the effects of solid-liquid ratio and enzyme concentration on the yield of pepsin-soluble collagen: the extraction time was constant at 6 h|
Click here to view
SDS-PAGE patterns of PSC
The SDS-PAGE patterns of the collagens from the skin of the sturgeons were determined under nonreducing and reducing conditions, which was shown in [Figure 4]. It is observed that the major components of collagens comprised α-chain and β-chain. The α1 -chain, α2 -chain, and β-chain patterns were similar to those of standard collagen type I from calf skin (lane 1). The α-chain and β-chain had subunits molecular weights of 116 and 200 kDa, respectively. It was, therefore, evident that the sturgeon skin collagen is type I collagen and the electrophoretic patterns of collagens under nonreducing and reducing conditions were quite similar. The major component of type I collagen are two α1 - and one α2-chain ([α1 ] 2α2 ). The sturgeon skin collagen molecule depicted [α1 ] 2α2 . It is obvious that type I collagen is the main collagen in collagen extracted with pepsin from the sturgeon skin. This observation is in agreement with the findings reported by Muyonga and Kittiphattanabawon. ,
|Figure 4: SDS-PAGE pattern of collagen from sturgeon skin under reducing and nonreducing conditions. Lane M: high MW protein markers; lane 1: calf-skin collagen; lane 2: collagen from sturgeon skin under reducing conditions; lane 3: collagen from sturgeon skin under nonreducing condition|
Click here to view
FTIR spectra of PSC from sturgeon skin
Fourier transform infrared spectroscopy was used to study changes in the secondary structure of collagen.  The FTIR spectra in the range of 4000-400 cm -1 of collagens from the sturgeon skin are presented in [Figure 5]. The main absorption bands were amide A (3333 cm -1 ), amide B (2922 cm -1 ), amide I (1653 cm -1 ), amide II (1539 cm -1 ), and the amide III (1238 cm -1 ).
Amide A peak of PSC was found at 3333 cm -1 . However, there was a slight shift of the amide A peak of PSC to lower wave number when compared with other proteins. Normally, a free N-H stretching vibration commonly occurs in the range of 3400-3440 cm -1 , and the position is shifted to the lower frequencies when the hydrogen bonds formed stabilized the helix structure.  The amide B peak of the collagens (2922 cm -1 ) was attributed to the asymmetrical stretch of CH 2 (2920-2922 cm -1 ) stretching vibration. 
Amide I peak of PSC was also found at 1653 cm -1 , which was associated with C=O stretching vibration or hydrogen bond coupled with COO - .  The amide I band is said to be the most useful amide for the infrared spectroscopic analysis of the secondary structure of proteins.  The amide II peak of the collagens was observed at 1539 cm -1 , resulting from N-H bending vibration coupled with the stretching vibration of CN (1536-1544 cm -1 ).  The amide III peak of the collagens was observed at 1238 cm -1 . The amide I peak was associated with the triple-helical structure 1 (1234-1235 cm -1 ). On the basis of the slight differences with other proteins, the triple-helical structure might be slightly affected by pepsin digestion during collagen extraction. 
| Conclusion|| |
From the study, various factors including, extraction time, enzyme concentration, and solid-liquid ratio had significant effects on the yield of PSC. The optimal conditions include a solid-liquid ratio of 1:11.88, an enzyme concentration of 2.42%, and the extraction time of 6.45 h. Under the optimal conditions, the maximum content of PSC was 86.69%, which was not significantly different from the predicted yield (87.4%) ( P < 0.05). The results of the study therefore indicated that the production of PSC from sturgeon skin is feasible and beneficial. From the SDS-PAGE patterns, it was concluded that the sturgeon skin collagen was type I collagen, with the collagen molecule depicted as [α1 ] 2α2 . The FTIR spectra, therefore, suggested that pepsin hydrolysis does not affect the triple-helical structure.
| Acknowledgement|| |
This work was supported financially by Graduate Innovative Projects in Jiangu Province (CXZZ11-0589).The authors gratefully acknowledge Lianchuang Aquatic Science and Technology Demonstration Park of Zhenjiang(China) for providing sturgeon. We also appreciate Dr. Mohanmmed Takase for language polishing.
| References|| |
|1.||Bai J, Ma D, Lao H, Jian Q, Ye X, Luo J, et al. Molecular cloning, sequencing, expression of Chinese sturgeon cystatin in yeast Pichia pastoris and its proteinase inhibitory activity. J Biotechnol 2006;125:231-41. |
|2.||Bo Cheng YH, Zhong LV, Qiang D, Hongyan Z, Fenfen FU, Zeqiao L. Study on determination of collagen in the fin of cultivated sturgeon. Chin Food Addict 2008;4:126-9. |
|3.||Hao S, Li L, Yang X, Cen J, Shi H, Bo Q, He J. The characteristics of gelatin extracted from sturgeon (Acipenser baeri) skin using various pretreatments. Food Chem 2009;115:124-8. |
|4.||Kittiphattanabawon P, Benjakul S, Visessanguan W, Kishimura H, Shahidi F. Isolation and Characterisation of collagen from the skin of brownbanded bamboo shark (Chiloscyllium punctatum). Food Chem 2010;119:1519-26. |
|5.||Guo J, Luo Ye, Fan D, Gao P, Ma X, Zhu C. Analysis of metabolic products by response surface methodology for production of human-like collagen II. Chin J Chem Eng 2010;18:830-6. |
|6.||Zhang C, Fan D, Shang La, Ma X, Luo Ye, Xue W, et al. Optimization of fermentation process for human-like collagen production of recombinant escherichia coli using response surface methodology. Chin J Chem Eng 2010;18:137-42. |
|7.||Singh P, Benjakul S, Maqsood S, Kishimura H. Isolation and characterisation of collagen extracted from the skin of striped catfish (Pangasianodon hypophthalmus). Food Chem 2011;124:97-105. |
|8.||Nalinanon S, Benjakul S, Kishimura H, Osako K. Type I collagen from the skin of ornate threadfin bream (Nemipterus hexodon): Characteristics and effect of pepsin hydrolysis. Food Chem 2011;125:500-7. |
|9.||Triveni R, Shamala TR, Rastogi NK. Optimised production and utilisation of exopolysaccharide from Agrobacterium radiobacter. Process Biochem 2001;36:787-95. |
|10.||Tang XH, Yan LF, Gao J, Ge HY, Yang HD, Lin N. Optimization of extraction process and investigation of antioxidant effect of polysaccharides from the root of Limonium sinense Kuntze. Phcog Mag 2011;7:186-92. |
|11.||Yang B, Zhao M, Shi J, Yang N, Jiang Y. Effect of ultrasonic treatment on the recovery and DPPH radical scavenging activity of polysaccharides from longan fruit pericarp. Food Chem 2008;106:685-90. |
|12.||Wang L, Yang B, Du X, Yi C. Optimisation of supercritical fluid extraction of flavonoids from Pueraria lobata. Food Chem 2008;108:737-41. |
|13.||Suphatharaprateep W, Cheirsilp B, Jongjareonrak A. Production and properties of two collagenases from bacteria and their application for collagen extraction. New Biotechnol 2011;28:649-55. |
|14.||Cao H, Xu S-Y. Purification and characterization of type II collagen from chick sternal cartilage. Food Chem 2008;108:439-45. |
|15.||Xu R, Chen YJ, Wan DR, Wang J. Identification of four Sedum plant medicines by fourier transform infrared spectra. Phcog Mag 2012;8:107-10. |
|16.||Liyana-Pathirana C, Shahidi F. Optimization of extraction of phenolic compounds from wheat using response surface methodology. Food Chem 2005;93:47-56. |
|17.||Nath A, Chattopadhyay PK. Optimization of oven toasting for improving crispness and other quality attributes of ready to eat potato-soy snack using response surface methodology. J Food Eng 2007;80:1282-92. |
|18.||Sin HN, Yusof S, Sheikh Abdul Hamid N, Rahman RA. Optimization of enzymatic clarification of sapodilla juice using response surface methodology. J Food Eng 2006;73:313-9. |
|19.||Rosenthal A, Pyle DL, Niranjan K. Aqueous and enzymatic processes for edible oil extraction. Enzyme Microb Tech 1996;19:402-20. |
|20.||Muyonga JH, Cole CGB, Duodu KG. Characterisation of acid soluble collagen from skins of young and adult Nile perch (Lates niloticus). Food Chem 2004;85:81-9. |
|21.||Kittiphattanabawon P, Benjakul S, Visessanguan W, Nagai T, Tanaka M. Characterisation of acid-soluble collagen from skin and bone of bigeye snapper (Priacanthus tayenus). Food Chem 2005;89:363-72. |
|22.||Friess W, Lee G. Basic thermoanalytical studies of insoluble collagen matrices. Biomaterials 1996;17:2289-94. |
|23.||Muyonga JH, Cole CG, Duodu KG. Fourier transform infrared (FTIR) spectroscopic study of acid soluble collagen and gelatin from skins and bones of young and adult Nile perch (Lates niloticus). Food Chem 2004;86:325-32. |
|24.||Abe Y, Krimm, S. Normal vibrations of crystalline polyglycine I. Biopolymers 1972;11:1817-39. |
|25.||Payne KJ, Veis, A. Fourier transform IR spectroscopy of collagen and gelatin solutions: Deconvolution of the Amide I band for conformational studies. Biopolymers 1988;27:1749-60. |
|26.||Surewicz WK, Mantsh, H. H. New insight into protein secondary structure from resolution-enhanced infrared spectra. Biochim Biophys Acta 1988;952:115-30. |
|27.||Krimm S, Bandekar J. Vibrational spectroscopy and conformation of peptides, polypeptides, and proteins. Adv Protein Chem 1986; 38:181-364. |
|28.||Nagai T, Suzuki N. Isolation of collagen from fish waste material-skin, bone and fins. Food Chem 2000;68:277-81. |
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5]
[Table 1], [Table 2], [Table 3]
|This article has been cited by|
||Morinda citrifolia mitigates rotenone-induced striatal neuronal loss in male Sprague-Dawley rats by preventing mitochondrial pathway of intrinsic apoptosis
| ||S. Narasimhan Kishore Kumar,Jayakumar Deepthy,Uthamaraman Saraswathi,Mohan Thangarajeswari,Sathyamoorthy Yogesh Kanna,Pannerselvam Ezhil,Periandavan Kalaiselvi |
| ||Redox Report. 2016; : 1 |
|[Pubmed] | [DOI]|
||ß-Secretase (BACE1) inhibitory and neuroprotective effects of p-terphenyls from Polyozellus multiplex
| ||So-Hyun Chon,Eun-Ju Yang,Taeho Lee,Kyung-Sik Song |
| ||Food Funct.. 2016; |
|[Pubmed] | [DOI]|
||Enhanced anti-oxidative effect of fermented Korean mistletoe is originated from an increase in the contents of caffeic acid and lyoniresinol
| ||Se-Yong Kim,Eun-Ju Yang,Youn Kyoung Son,Joo-Hong Yeo,Kyung-Sik Song |
| ||Food Funct.. 2016; |
|[Pubmed] | [DOI]|
||Application of Non-conventional Extraction Methods: Toward a Sustainable and Green Production of Valuable Compounds from Mushrooms
| ||Elena Roselló-Soto,Oleksii Parniakov,Qian Deng,Ankit Patras,Mohamed Koubaa,Nabil Grimi,Nadia Boussetta,Brijesh K. Tiwari,Eugène Vorobiev,Nikolai Lebovka,Francisco J. Barba |
| ||Food Engineering Reviews. 2015; |
|[Pubmed] | [DOI]|
||Polyozellin, a key constituent of the edible mushroom Polyozellus multiplex, attenuates glutamate-induced mouse hippocampal neuronal HT22 cell death
| ||Eun-Ju Yang,Kyung-Sik Song |
| ||Food Funct.. 2015; 6(12): 3678 |
|[Pubmed] | [DOI]|
||Polyphenols and mitochondria: An update on their increasingly emerging ROS-scavenging independent actions
| ||Cristian Sandoval-Acuña,Jorge Ferreira,Hernán Speisky |
| ||Archives of Biochemistry and Biophysics. 2014; 559: 75 |
|[Pubmed] | [DOI]|
||Kaempferol attenuates the glutamate-induced oxidative stress in mouse-derived hippocampal neuronal HT22 cells
| ||Eun-Ju Yang,Geum-Soog Kim,Mira Jun,Kyung-Sik Song |
| ||Food & Function. 2014; 5(7): 1395 |
|[Pubmed] | [DOI]|
||First evidence of chitin in calcified coralline algae: new insights into the calcification process of Clathromorphum compactum
| ||M. Azizur Rahman,Jochen Halfar |
| ||Scientific Reports. 2014; 4: 6162 |
|[Pubmed] | [DOI]|